Scan Return
With Scan return turned on, a trackable item can be returned at the vending machine by scanning the label on the item. Nobody logs in. The worker taps Return item (scan) on the machine’s start screen, scans the label, checks the item on screen and taps Return, and the item’s own slot opens.
This is built for sites where tools change hands at shift change. The worker coming off shift passes a gas detector or a radio to the worker coming on, and it is the second worker who eventually returns it. Without scan return that item is not on their return list, because the loan belongs to the employee who took it, so they cannot return it and someone has to fix it from the website. With scan return, whoever is holding the item can put it back.
What turning it on means
- Holding the item is enough to return it. The machine does not ask who is returning it, and nobody is notified when an item is returned this way. If a label is copied or photographed, a loan can be closed on an item that never went back into the machine. Decide whether that is acceptable for your site; CCTV over the machine and your site rules are what deter misuse.
- The employee who took the item stays on record. A scan return closes the loan of the employee who borrowed the item (the borrower), exactly as if they had returned it themselves. The person who scanned it is not identified.
- Every scan return is visible afterwards. The item’s history shows the loan as ended by Scan return at {machine name}, the Returned by scan filter on the Trackable Items page lists the items whose last return was a scan return, and each one is recorded in the audit log against the machine.
- Only items taken from a machine slot can be scan returned, and only at that same machine. The item goes back into the slot it is currently assigned to. Items taken from a locker, claimed in the mobile app or assigned to an employee by an admin have no slot to go back to; the machine tells the worker to give those to their supervisor.
- Employees can still return items the usual way. Logging in and choosing Return works as before, and the start screen’s login buttons and card reader are unchanged.
Before you start
- Fit a scanner to each machine that should accept scan returns — see Install the scanner.
- Label your items. Every trackable item already has an asset tag. Print labels for the items you lend out, or use your own asset numbers — see Asset tags and Print labels.
- Turn on Scan return for your organization.
Turn Scan return on or off
- Visit the Organization Information page.
- Open the Kiosk & Sign-in tab. In the Item Pickup Methods section, set Scan return to Yes.
- Save the pickup methods.
Scan return is off by default and applies to every vending machine in the organization. Machines pick the change up on their next configuration refresh, so allow up to ~13 minutes for the Return item (scan) button to appear or disappear (see Backend config changes are not instant).
To stop scan returns, set Scan return back to No. The server refuses scan returns from that moment, even on a machine that is still showing the button.
At the vending machine
- On the start screen, tap Return item (scan). It sits on its own line below the login buttons and only appears while Scan return is on.
- The machine asks you to scan the label on the item. Hold the item’s QR code or barcode under the scanner.
- Check the item name, product and the time it has been in use since, then tap:
- Return to put it back, or
- Require attention if it is damaged or not working. The item is returned and set to Pending Inspection so nobody can take it until an admin has checked it, and the admins are emailed as for any other pending inspection.
- Cancel to go back without returning it.
- The item’s slot opens and the machine shows which slot to put the item in.
- Scan the next item straight away, or tap Done when you have finished. If nobody touches the machine, the scan screen times out back to the start screen.
The machine opens the slot before it records the return. If the slot opens but the return cannot be recorded (for example the network drops at that moment), the machine says the return was not recorded and asks the worker to tell their supervisor; check the item on the website.
A returned item becomes Ready for the next employee, unless Require attention was tapped or the item is due its regular inspection, in which case it becomes Pending Inspection.
Messages the worker may see
| Message | What it means | What to do |
|---|---|---|
| We don’t recognise this item. Please ask your supervisor. | No item in your organization has that asset tag. Retired and deleted items count as unknown. | Check the label; the tag may have been changed since it was printed. |
| This item has already been returned. | The item is not on loan. A second scan of an item never opens a door. | Nothing. |
| This item was taken from machine name. Please return it there. | The item was taken from a slot on another machine. | Return it at the machine named on screen. |
| This item doesn’t have a slot in this machine. Please give it to your supervisor. | The item is on loan but has no slot on any machine — taken from a locker, claimed in the app, assigned by an admin, or its slot has been given to another item. | An admin can return it from the website. |
| Please ask your supervisor. | More than one item in your organization has that asset tag. | Give one of them a new tag with Change asset tag. |
| Scan return is unavailable right now. | The machine could not reach the server, or Scan return has just been turned off. | Try again shortly, or log in and return the item the usual way. |
| The slot didn’t open. Please ask your supervisor. | The machine could not open the slot. Nothing was recorded; the item is still on loan. | Check the machine; an admin can return the item from the website. |
| Return not recorded - please tell your supervisor. | The slot opened but the server did not record the return. | Check the item on the website and return it there if it is still in use. |
Asset tags
Every trackable item has an asset tag, and the tag is what the machine reads from the label.
- Generated for you. A new item gets a 10-character tag made of capital letters and digits, leaving out the easily confused 0, O, 1, I and L. Every item that existed before this feature was given one too.
- Hidden while the item is a draft. A Draft item already has a tag, but the website does not show it until the item leaves Draft.
- Use your own asset numbers if you prefer. Type a tag when you add the item, when you use Assign Asset Tag on a draft (the box is filled in with the generated tag; keep it or replace it), or at any time with Change asset tag. Your own tags can be 3 to 64 characters and may include characters such as
/,.and spaces. - Change asset tag works in every state except Retired and Deleted. A label printed with the old tag stops working, so reprint it.
- Unassign Asset Tag moves an item back to Draft with a new hidden tag.
- Unique within your organization. No two items may share a tag, and that includes retired and deleted items, which keep theirs. A tag that is taken is refused with Asset tag already in use.
- Not case-sensitive. Tags are stored in capitals, and a scan matches regardless of case and of spaces before or after the tag.
If your organization had two items with the same tag before this release, both were left as they were. A scan of either one asks the worker to see their supervisor; give one of them a new tag with Change asset tag.
Print labels
On the Trackable Items page:
- Tick the items you want labels for in the All Trackable Items table.
- Click Print labels. The button shows how many labels will be printed.
- In your browser’s print dialog choose A4 paper and print at 100% (actual size) scale.
To print the label of a single item, click the QR code in its Asset Tag column. A popup shows the label as it will print; click Print label there. You do not need to tick the row first.
Each label carries a QR code and a Code 128 barcode of the asset tag, the tag itself, the item name, and Scan at the vending machine to return. Labels print two to a row. Draft items are skipped, because their tag is not in use yet; assign their asset tag first.
Labels for tools that are handled underground or outdoors wear quickly on plain paper. For durable labels, click Export CSV to download the name, product, state and asset tag of your items, and load the file into your own label printer’s software. The export follows the Show in-use item only and Returned by scan filters that are ticked at the time.
Install the scanner
Scan return needs a USB QR code scanner plugged into the vending machine. Choose one that reads both QR codes and Code 128 barcodes, and set it up as follows (most scanners are configured by scanning setup barcodes from their own manual):
- USB HID keyboard mode (sometimes called keyboard emulation or keyboard wedge). The scanner types the code as if it were a keyboard; no driver is needed.
- Enter suffix. The scanner sends Enter (carriage return) after each code, which is how the machine knows the code is complete.
- US keyboard layout. Other layouts can turn characters such as
/and-into the wrong symbols.
Plug the scanner into a free USB port on the machine. To test it, turn on Scan return, tap Return item (scan) and scan a label: an item that is not on loan should show Already returned.
The machine only reads labels on the scan screen, so always tap Return item (scan) before scanning; a label scanned anywhere else is never treated as a return. A card reader on the same machine keeps working on the start screen exactly as before.
Frequently Asked Questions
Q1: Who is recorded as returning the item?
The employee who borrowed it. The loan is closed under their name and marked as a scan return; the person who scanned it is not identified.
Q2: Is anyone told when an item is scan returned?
No. Use the Returned by scan filter on the Trackable Items page and the item history to review scan returns. Items returned with Require attention send the usual pending inspection email.
Q3: Can a worker scan return an item at a different machine?
No. The item must go back to the machine it was taken from, into its own slot. The machine names the right machine when the item belongs elsewhere.
Q4: Can I turn Scan return on for one machine only?
No. The setting applies to the whole organization. A machine without a scanner still shows the button; a worker who taps it can cancel back to the start screen.
Q5: Does a scan return work for items in lockers?
No. Scan return covers vending machine slots only. Return locker items as described in Trackable Lockers.